Mounting into the hole – online calculation

The bushing is installed in a hole and the force of assembly or detachment is calculated. The inner diameter of the bushing is loose and clearance; the outer diameter is tight mating and interference fit; The shaft can rotate freely

Description

• The outer diameter of the hole, if it is irregular or non-circular, please feel free to fill in more than the inner diameter +4~10mm.
• The outer diameter of the shaft lining needs to be greater than the inner diameter of the hole to have the compression force & pull-out force.
• If you use a flange bushing, you need to deduct the flange height yourself.
• If you don’t find a material, please choose a similar material or fill out the online contact form and we will get back to you as soon as possible.
• Values are for reference only.

hole
Hole Material:	POM PTFE Polyetheretherketone, PEEK Nylon 46 Nylon 6 Nylon 66 PEI PI PPS PP PC PS PVC HDPE Aluminum 6061-0 Cast iron No steel Carbon steel
Inner diameter, unit: mm
Outer diameter, unit: mm
Bushings
Liner Material:	POM PTFE Polyetheretherketone, PEEK Nylon 46 Nylon 6 Nylon 66 PEI PI PPS PP PC PS PVC HDPE Aluminum 6061-0 Cast iron No steel Carbon steel
Inner diameter, unit: mm
Outer diameter, unit: mm
Height, unit: mm
coefficient of friction