Bushing Speed Bushing Speed refers to the linear velocity achieved by the surface in the lining that is subjected to the movement of the object. Speed, expressed as the concept of time, is the distance traveled by each unit of time, is the English letter code capital V, the full name is Velocity, the size […]

What are the types of Wear? This article is more professional, share some of my own experience, because the wear and tear situation is quite complex, unable to be fully explained, and there is no standard answer, so it is for reference only. What you think is the general rule of wear and tear may […]

What Is Wear When two contacting solids move relative to each other, the surface material of the solids gradually decreases, and material loss occurs. This phenomenon is called abrasion, and some people call it wear. In most mechanical structures, there are parts with relative motion such as sliding or rolling. Since wear can determine the […]

Bushing Pressure What is Pressure? Pressure, the force exerted from top to bottom, is the English letter code with a capital letter P, the full name is Pressure, so it can be interpreted as the force on the surface of an object in a unit area or a unit area or contact area, and the […]

Bushing fit Assembly method Clearance Fit Interference Fit Overfit, Transition Fit The above statement may not be formal, I hope it can help readers understand better, and for a more professional statement, please refer to the following link.http://www.taiwan921.lib.ntu.edu.tw/mypdf/drawing13.pdf How it is applied Installed in the hole The outer diameter of the bushing is closely matched […]